Glass Epoxy Sheet

Product Details:

FR1 Paper Phenolic Copper Clad Laminates are cost-effective PCB base materials made from high-quality paper impregnated with phenolic resin and laminated with copper foil on one or both sides. These laminates are widely used in low-cost electronic applications where moderate mechanical and electrical performance is sufficient.

• Good electrical insulation properties
• Smooth and uniform copper surface
• Easy to cut, punch, and machine
• Cost-effective compared to FR4 laminates
• Lightweight and reliable for general applications
• Good dimensional stability

Product Details:

Industrial Epoxy Sheet is a high-performance laminate manufactured using glass fiber reinforcement combined with premium-grade epoxy resin. Designed for demanding industrial applications, these sheets offer excellent mechanical strength, superior electrical insulation, thermal resistance, and long-lasting durability.

Industrial epoxy sheets are widely used in electrical, mechanical, construction, and heavy engineering sectors where strong, dimensionally stable, and heat-resistant materials are required.

• High Mechanical & Impact Strength

• Excellent Electrical Insulation Properties

• Heat Resistant (Up to 130°C – 180°C depending on grade)

• Moisture & Water Resistant

• Chemical & Corrosion Resistant

• Low Water Absorption

• High Load-Bearing Capacity

• Dimensional Stability

• Easy to Machine, Drill & Fabricate

Product Details:

We offer a wide range of FR4 Insulation Glass Epoxy Sheet.

These are fire resistant and durable in service and have good flexibility.

Our range of insulating materials includes Insulating Sheet.

We bring the highest quality of insulation sheets which are designed to offer the high level of heat resistance.

Instructions:

• Rated Voltage: 35KV
• Tensile Strength: 340MPa
• Thickness: 0.3mm-80mm
• Size: 1020X2020mm, 1020X1220mm or customized
• Temperature: 120 -160
• Density: 1.9-2.15 g/cm3
• Impact Strength:≥33KJ/m2

Product Details:

FR4 Glass Epoxy Sheet also known as fibreglass sheet, glass reinforced plastics GRP is made from fibreglass cloth and epoxy resin.

It is also referred as FRP sheet fibreglass reinforced plastic. We deal in for 4 for scraps or off cut as well as for sheets.

Instructions:

• Material: Fiberglass
• thickness: 0.5-100mm
• size 1: 10201220mm
• size 2: 12202440mm

FR4 Epoxy Sheet is a premium-grade glass fiber reinforced laminate manufactured using woven glass fabric bonded with flame-retardant epoxy resin under high pressure and temperature. Known for its excellent electrical insulation properties, high dielectric strength, thermal stability, and mechanical durability, FR4 sheets are widely used in electrical and electronic applications.

FR4 grade material is specially designed for environments requiring flame resistance and reliable insulation performance in high-voltage and high-temperature conditions.

• Flame Retardant (FR4 Grade)

• Excellent Electrical Insulation

• High Dielectric Strength

• Heat Resistant (Up to 130°C – 180°C)

• High Mechanical & Impact Strength

• Low Water Absorption

• Moisture & Chemical Resistant

• Arc & Tracking Resistant

• Easy to Machine, Drill & Fabricate

Electrical Grade Epoxy Sheet is a high-performance insulation laminate manufactured using woven glass fiber fabric impregnated with premium epoxy resin. Designed specifically for electrical and electronic applications, these sheets provide excellent dielectric strength, thermal stability, mechanical durability, and long service life.

Electrical grade epoxy sheets are widely used in switchgear panels, transformers, control panels, and high-voltage equipment where reliable insulation and safety are critical.

• Excellent Electrical Insulation Properties

• High Dielectric Strength

• Heat Resistant (Up to 130°C – 180°C depending on grade)

• Flame Retardant Option (FR4 Grade)

• High Mechanical & Impact Strength

• Low Water Absorption

• Arc & Tracking Resistant

• Moisture & Chemical Resistant

• Easy to Machine & Fabricate

Custom Size FR4 Epoxy Sheet is a premium-grade glass fiber reinforced epoxy laminate manufactured to meet specific industrial and electrical requirements. Made from woven glass fabric bonded with flame-retardant epoxy resin, FR4 sheets offer excellent electrical insulation, high mechanical strength, thermal resistance, and dimensional stability.

Available in tailor-made thicknesses, lengths, and widths, these sheets are ideal for OEM manufacturers, panel builders, and engineering industries requiring precision-cut insulation materials.

• Custom Thickness & Dimensions Available

• Flame Retardant (FR4 Grade)

• High Dielectric Strength

• Excellent Electrical Insulation

• Heat Resistant (Up to 130°C – 180°C)

• High Mechanical & Impact Strength

• Low Water Absorption

• Moisture & Chemical Resistant

• Easy to CNC Machine & Fabricate

Flame Retardant Epoxy Glass Sheet is a high-performance electrical insulation laminate manufactured using woven glass fiber cloth bonded with flame-retardant epoxy resin. Designed to meet stringent fire safety and insulation standards, these sheets provide excellent dielectric strength, thermal stability, mechanical durability, and superior flame resistance.

Commonly available in FR4 grade, this material is widely used in electrical, electronic, and industrial applications where fire safety and reliable insulation are critical.

• Flame Retardant (FR4 Grade)

• Excellent Electrical Insulation Properties

• High Dielectric Strength

• Heat Resistant (Up to 130°C – 180°C)

• Strong Mechanical & Impact Strength

• Low Water Absorption

• Arc & Tracking Resistant

• Chemical & Moisture Resistant

• Easy to Machine, Drill & Fabricate

• Electrical Switchgear Panels

• Transformer Insulation Components

• Bus Bar Supports

• Control & Distribution Panels

• Circuit Breaker Components

• PCB Base Material

• High Voltage Equipment

• Motor & Generator Insulation

Moisture Resistant FR4 Sheet is a high-performance glass epoxy laminate designed for electrical and industrial applications where resistance to humidity and water exposure is essential. Manufactured using woven glass fiber cloth impregnated with flame-retardant epoxy resin, FR4 sheets offer excellent electrical insulation, low water absorption, high mechanical strength, and long-term dimensional stability.

These sheets perform reliably in humid and high-moisture environments, making them ideal for switchgear panels, transformers, marine equipment, and outdoor electrical systems.

• Excellent Moisture & Humidity Resistance

• Low Water Absorption

• High Dielectric Strength

• Superior Electrical Insulation Properties

• Flame Retardant (FR4 Grade)

• Heat Resistant (Up to 130°C – 180°C)

• Strong Mechanical & Impact Strength

• Chemical & Corrosion Resistant

• Easy to Machine & Fabricate

• Electrical Switchgear Panels

• Transformer Insulation Components

• Bus Bar Supports

• Outdoor Electrical Enclosures

• Marine & Coastal Electrical Systems

• Motor & Generator Insulation

• Control Panels & Distribution Boards

• Material: Glass Fiber Reinforced Epoxy Resin

• Grade: FR4 (Flame Retardant)

• Thickness: 0.5 mm to 100 mm

• Color: Green / Yellow / Natural

• Excellent Arc & Tracking Resistance

Epoxy Glass Sheet for Transformer Insulation is a high-performance industrial laminate manufactured from woven glass fiber cloth impregnated with premium epoxy resin. Designed specifically for transformer and high-voltage electrical applications, these sheets provide excellent dielectric strength, thermal stability, mechanical strength, and long-term insulation reliability.

Epoxy glass sheets are widely used in power distribution systems, electrical equipment, and heavy engineering industries where safe and efficient insulation is critical.

• High Dielectric Strength for Transformer Insulation

• Excellent Electrical Insulation Properties

• Heat Resistant (Up to 130°C – 180°C depending on grade)

• High Mechanical & Structural Strength

• Low Water Absorption

• Flame Retardant Option (FR4 Grade)

• Moisture & Chemical Resistant

• Dimensional Stability Under Load

• Easy to Machine & Fabricate

• Power & Distribution Transformers

• Bus Bar Supports

• Coil Insulation Barriers

• Switchgear & Control Panels

• High Voltage Equipment

• Motor & Generator Insulation Parts

• Electrical Panel Boards

FR4 Glass Epoxy Sheet for Electrical Insulation is a premium-grade industrial laminate manufactured from woven glass fiber cloth impregnated with flame-retardant epoxy resin. Known for its excellent electrical insulation, high mechanical strength, thermal stability, and flame resistance, FR4 sheets are widely used in electrical and electronic applications.

FR4 grade material offers superior dielectric strength and maintains dimensional stability even under high temperature and humid conditions, making it ideal for demanding industrial environments.

• Excellent Electrical Insulation Properties

• High Dielectric Strength

• Flame Retardant (FR4 Grade)

• Heat Resistant (Up to 130°C – 180°C)

• High Mechanical & Impact Strength

• Low Water Absorption

• Arc & Tracking Resistant

• Moisture & Chemical Resistant

• Easy to Machine & Fabricate

CK Trading is a trusted supplier of premium quality Heat Resistant Epoxy Sheets, specially designed for high-temperature electrical and industrial applications. Manufactured using high-grade glass fiber fabric combined with superior epoxy resin, these sheets offer excellent thermal stability, high mechanical strength, superior electrical insulation, and long-lasting performance under extreme conditions.

Our FR4 and G10 Heat Resistant Epoxy Sheets are widely used in electrical panels, transformers, switchgear systems, and heavy engineering industries where heat resistance and insulation reliability are critical.